- Application Manual 12 Using the Electronic Driver Log App Note: Your phone or tablet must have a data plan for the app to work as intended. Driver Login Each driver using the system will have a unique login ID. As a driver, you may be logged on to only one mobile device at any time.
- HID Mobile Configuration Application User Guide Information on how to use the Config App in order to change the BLE reader Configuration settings and update module firmware. Installers HID Global Partner Portal. HID Mobile Access Solution Overview, PLT-02078, Rev.
- Values to the application running on the PC. Figure 1 shows some typical HID environments. To SPP mode, allowing SPP and remote configuration (for example from Bluetooth clients with SPP). Then, you can use. Bluetooth HID Profile User Manual.
- HID Mobile Access App User Guide, PLT-02077, Rev. Sets up the HID Mobile Access configuration. 3: Configuration. Do not delete the HID Mobile Access application from your mobile device unless instructed to do so by your Security Administrator. If the appl ication is deleted, or if.
- Access Control Manager (ACM)™ System with HID Mobile Access™ Avigilon now supports the HID Mobile Access solution from HID Global. This technology from HID, in connection with the Access Control Manager (ACM)™ system, provides a seamless user experience that maximizes building security, keeping people, property and assets safe.
August 28, 2009
What Do I Need to Know to Successfully Deploy Mobile Access? Hat Do I Need to now to Successfully Deploy Mobile Access 2. We’ve produced this guide to mobile access configuration to help answer two critical questions. Of users and user groups, roles and access rights, identities and devices.
Page 6 of 9
© 2009 HID Global Corporation. All rights reserved.
SmartID Generic Configuration Guide, D00844, A.4
SmartID, SmartTRANS and SmartTOUCH MIFARE Application
Applicable Part Numbers (Reader / Application):
8030DSCM SmartID S10 Read Only Reader, MIFARE
8031DSCM SmartID SK10 Read Only Keypad Reader, MIFARE
8100DSCM SmartTRANS SP10 Read Only Reader, MIFARE
8101DSCM SmartTRANS SPK10 Read Only Keypad Reader, MIFARE
800-8050 SmartTOUCH SB10 Read Only Reader, MIFARE
800-8055 SmartTOUCH SBK10 Read Only Keypad Reader, MIFARE
Part Number
Description
01SMR-0011
MIFARE Read Only Serial Number Wiegand 34
01SMR-0014
MIFARE Read Only Serial Number Wiegand 37
01SMR-0021
MIFARE Read Only Serial Number ABA 10 Digits
01SMR-1000
MIFARE Read Only IE Format Sector 1
01SMR-1020
MIFARE Read Only IE Format Sector 1 RS232 115K2 10D Card
01SMR-1150
MIFARE (ISO 14443) IE Format WG34 output
01SMR-2000
MIFARE Read Only Serial Number Wiegand 26
01SMR-2005
ISO 14443-3B Serial Number Wiegand 26
01SMR-2020
MIFARE Read Only Serial Number Wiegand 37
01SMR-2024
MIFARE Read Only Serial Number Wiegand 32 (MSB first)
01SMR-2025
MIFARE Read Only Serial Number Wiegand 32 (LSB first)
Hid Mobile Access App
01SMR-2030
MIFARE Read Only Serial Number ABA 10 Digits
01SMR-2035
MIFARE Read Only Serial Number ABA 10 Digits ASB output
01SMR-2040
MIFARE Read Only Serial Number RS232 10 Digits
01SMR-2045
MIFARE Read Only Serial Number RS232 10 Digits 115k2
01SMR-2060
MIFARE Read Only Serial Number RS232 8 Digits
01SMR-2070
MIFARE Read Only Serial Number RS232 6 Hex
Software Application User Manual
01SMR-4040
DESFire Serial Number Wiegand 58
01SMR-4041
MIFARE/DESFire serial Number Wiegand 56 no parity
01SMR-4042
MIFARE/DESFire Serial Number Wiegand 56 no parity + HID Prox Wiegand + PIN WG4
(SmartT..)
01SMR-4045
DESFire Serial Number Wiegand 56 No Parity
01SMR-7100
MIFARE (ISO 14443) IE Format + 125 kHz Proximity ABA 16 (SmartTRANS)
01SMR-7105
MIFARE (ISO 14443) IE Format + 125 kHz Proximity Wiegand (SmartTRANS)
15370 Barranca Parkway
Irvine, CA 92618
USA
SmartID
™
Generic Configuration Guide
D00844, A.4
October 29, 2009
© 2009 HID Global Corporation. All rights reserved.
Summary
The Generic Configuration Guide contains open format configurations for pairing with SmartID,
SmartTRANS and SmartTOUCH readers to create a complete reader solution.
Format configurations are an essential building block of the SmartID reader, and required for all
SmartID reader orders. Through format configurations SmartID readers are tailored to customer
requirements.
For reader customization beyond the generic configurations, reference the 13.56 MHz How to Order
Guide, SmartID MIFARE and DESFire Reader Custom Format Request Form.
Formats are specific for one to many reader hardware and applications. Together, a hardware and
application make up a part number (for example, Hardware SmartID Mullion + Application MIFARE =
Part Number 8030DSCM) An application is the set of procedures downloaded inside of the reader
that serves a specific purpose (for example, read a MIFARE or DESFire card, or accept serial
commands for a host driven read/write application). A configuration is used by the application to
adapt reader behavior to customer specific needs (for example, output a MIFARE card serial number
in 26 bits only, read application 0x300 from a DESFire card, or configure a serial driven reader for a
RS485 hardware interface.
Included in this document are format configurations for the following reader hardware and
applications:
SmartID and SmartTRANS HID MIFARE Application
SmartID, SmartTRANS and SmartTOUCH MIFARE Application
SmartID, SmartTRANS and SmartTOUCH DESFire Application
SmartID and SmartID Desktop with RS232, T=CL Application
SmartID Desktop with USB, PC/SC Application
August 27, 2009
Page 1 of 9
© 2009 HID Global Corporation. All rights reserved.
- Format Configurations